ENERPIA

The cutting-edge technology of ENERPIA leads to a richer life.

V-TYPE Heating Cable

V-TYPE Heating Cable: With newly developed V type heating cable (NON-ELECTRIC & MAGNETIC HEATING CABLE) main heating and supplementary heating on the floor can be conducted, using radiation from electric energy in order to make the indoor environment clean and provide convenient heating effect. It is a floor warming system which can be used for cases where it is difficult to install systems using oil, gas, and boiler or as an alternative of large-sized air handling facilities. HVAC system. The newly developed V-Type has a higher heat resistance by inserting the primary insulation of the heating wire with Teflon, and combines two heating wires and two tinned wires to further reduce the electric field and the magnetic field.

Economic feasibility

Greatly reduces construction cost using simple construction technique.
Central and partial heating are possible, providing heating that meets customers’ needs.

Safety

Coated with Teflon having a high heat-resistant temperature.
The electric and magnetic fields can be further reduced because of its structure made from heating wire and tinned wire.
Has no oil or smoke emission.

Functionality

Reduces building load due to thin thickness.
Can be used in various ways by adjusting the amount of radiation. (Sauna/Stockbreeding/Vinyl greenhouse, etc.)
Utilizes special radiation conductor that considers resistance value per unit length for high heating efficiency.

Simplicity

Does not require an additional management facility or costs after initial installation.
Does not require a boiler room, having advantage in space utilization

Classification	Model No.	Electricity consumption (W/h)	Length(m)	Applied area㎡	Notes
Dual core	EPDW20W24V	480	24	2.6-3.7	Ø6.8mm 20W/m Grounded Twisted
	EPDW20W48V	960	48	1,920
	EPDW20W72V	1,440	72	2,400
	EPDW20W96V	1,920	96	10.7-14.8
	EPDW20W120V	2,400	120	13.4-18.6

UTH-170(EPU-400)
UTH-170(EPU-400)
TYPE	Digital Type
Range of temperature	-20℃ ~80℃ (can be changed)
Power input	AC 85V AC 265V (SMPS)
Number of circuits	Individual
Allowable electric current	1 heating * 18A
Load capacity	4KW
Construction type	Exposed
Size	70(W) X 120(H) X 27(D)
Display Type	High-brightness YELLOW FND (indicates current temperature, set temperature), LED (indicates status)
Processor Type	Sensor type (NTC 5KΩ) / Timer setting / Auto OFF function by time
Option	#1: Overload sensor (optional) #2: Error message function (can change setting on range of temperature), output blocking #3: Overload sensor (produces error message for blocking output when overload occurs)

UTH-220
TYPE	Digital Type
Range of temperature	0 ℃ ~ 80 ℃ (can be changed)
Power input	AC 85V ~ AC 265V (SMPS)
Number of circuits	1Individual
Allowable electric current	1 heating * 18A
Load capacity	4KW
Construction type	Exposed
Size	70(W) X 120(H) X 27(D)
Display Type	High-brightness YELLOW FND (indicates current temperature, set temperature), LED (indicates status)
Processor Type	Sensor type(NTC 5KΩ) / Timer setting / Strength setting / Control by wireless remote control (remote control)
Option	#1: Overload sensor (optional) #2: Error message function (can change setting on range of temperature), output blocking #3: Overload sensor (produces error message for blocking output when overload occurs)

UTH-300
TYPE	Digital Type
Range of temperature	-20℃ ~ 180℃ (can be changed)
Power input	AC 85V ~ AC 265V (SMPS)
Number of circuits	2Individual
Allowable electric current	1 heating (16A), 2 heating (16A) – (MAX 32A)/td>
Load capacity	3.5KW * 2
Construction type	Exposed
Size	120(W) X 120(H) X 34(D)
Display Type	High-brightness YELLOW FND (indicates current temperature, set temperature), touch mode
Processor Type	Sensor type (NTC 5KΩ) / Timer setting
Option	#1: Overload sensor (optional) #2: Error message function (can change setting on range of temperature), output blocking #3: Overload sensor (produces error message for blocking output when overload occurs)