ENERPIA
The cutting-edge technology of ENERPIA leads to a richer life.
STAINLESS HEATING PIPE
- Product information
- An innovative heating technology that operates without a boiler or a circulation motor and increases heating efficiency through heating wire in enclosed stainless pipe . Silicone and Teflon insulation is used during the production process of a stainless heating pipe. Double insulation of the heating wire inside the stainless pipe ensures long-term product use. The system is convenient in heating of saunas and bathhouses.
Strong points of Heating S-H Pipe
- Convenience
-
- The stainless heating pipe is more flexible than the XL pipe, since it can be bend. For that reason, it is easy to install anywhere on the wall or on the floor, and can be tightly installed at narrower intervals, compared to XL pipe.
- Does not require boiler room, having advantage in utilization of space for other necessities.
- If product defect occurs, a repair can be done by opening check box without disassembling the floor which is very convenient when repairing the system. (Patent No. 0805703)
- Economic feasibility
-
- Electric energy is turned into heat and used for 100% room heating.
- Does not require facility piping, saving construction cost and construction period.
- Saves heating cost by over 70% for the area of the same size compared to oil or gas heating.
- Durability
-
- It is semi-permanent because there is no flow of system after construction.
- Durable stainless steel material is finished with silicone cap, and pipe is hardly deformed or damaged.
- It is furnished by inserting special insulated coated wire.
- It is suitable for sauna as it can perfectly withstand moisture.
- Safety
-
- Does not emit smoke or noise.
- The system harmless to human body, and maintains a pleasant atmosphere, as it heats the floor and the wall.
Specification of Heating S-H Pipe
| Model No. | Product specification | Rated electricity | Electricity consumption | Heating area (㎡) |
|---|---|---|---|---|
| DW40W010 | 14 m ×17 mm | 40W/m Construction gap : 7cm-10cm |
560Wh | 3.30 ㎡ |
| DW40W015 | 21 m ×17 mm | 840Wh | 4.95 ㎡ | |
| DW40W020 | 28 m ×17 mm | 1,120Wh | 6.60 ㎡ | |
| DW40W025 | 35 m ×17 mm | 1,400Wh | 8.25 ㎡ | |
| DW40W030 | 42 m ×17 mm | 1,680Wh | 9.90 ㎡ | |
| DW40W040 | 56 m ×17 mm | 2,240Wh | 13.20 ㎡ | |
| DW40W050 | 70 m ×17 mm | 2,800Wh | 16.50 ㎡ |
Installation information
Construction procedure
- 01
Design blueprint
- 02
Installation of insulating materials
- 03
Installation of check box
- 04
Wiring of stainless heating pipe in sauna
- 05
Fixing of stainless heating pipe
- 06
Performance test
- 07
Install finishing materials
- 08
Install thermostat
Information on subsidiary materials
Recommended thermostat
| UTH-170(EPU-400) | |
|---|---|
| TYPE | Digital Type |
| Range of temperature | -20℃ ~80℃ (can be changed) |
| Power input | AC 85V AC 265V (SMPS) |
| Number of circuits | Individual |
| Allowable electric current | 1 heating * 18A |
| Load capacity | 4KW |
| Construction type | Exposed |
| Size | 70(W) X 120(H) X 27(D) |
| Display Type | High-brightness YELLOW FND (indicates current temperature, set temperature), LED (indicates status) |
| Processor Type | Sensor type (NTC 5KΩ) / Timer setting / Auto OFF function by time |
| Option |
|
| UTH-200 | |
|---|---|
| TYPE | Digital Type |
| Range of temperature | 0 ℃ ~ 80 ℃ (can be changed) |
| Power input | AC 85V ~ AC 265V (SMPS) |
| Number of circuits | 1Individual |
| Allowable electric current | 1 heating * 18A |
| Load capacity | 4KW |
| Construction type | Exposed |
| Size | 70(W) X 120(H) X 27(D) |
| Display Type | High-brightness YELLOW FND (indicates current temperature, set temperature), LED (indicates status) |
| Processor Type | Sensor type(NTC 5KΩ) / Timer setting / Strength setting / Control by wireless remote control (remote control) |
| Option | #1: Overload sensor (optional) #2: Error message function (can change setting on range of temperature), output blocking #3: Overload sensor (produces error message for blocking output when overload occurs) |
| UTH-300 | |
|---|---|
| TYPE | Digital Type |
| Range of temperature | -20℃ ~ 180℃ (can be changed) |
| Power input | AC 85V ~ AC 265V (SMPS) |
| Number of circuits | 2Individual |
| Allowable electric current | 1난방(16A), 2난방(16A) – (MAX 32A) |
| Load capacity | 3.5KW * 2 |
| Construction type | Exposed |
| Size | 120(W) X 120(H) X 34(D) |
| Display Type | High-brightness YELLOW FND (indicates current temperature, set temperature), touch mode |
| Processor Type | Sensor type (NTC 5KΩ) / Timer setting |
| Option | #1: Produces buzzer alarm when error occurs #2: Overload sensor (optional) #3: Error message function (can change setting on range of temperature), output blocking #4: Sensor for preventing overload attached inside thermostat (blocks overheating) |
