ENERPIA
The cutting-edge technology of ENERPIA leads to a richer life.
Floor Heating Cable
- Floor heating cable
- A system which buries floor heating cable in the floor of the building, using radiation from electric energy to conduct main heating and supplementary heating on the floor in order to make the indoor environment clean and provide convenient heating effect.
It is a floor warming system which can be used for cases where it is difficult to install systems using oil, gas, and boiler or as an alternative of large-sized air handling facilities. HVAC system
Principles of blocking electromagnetic wave for non-electric & magnetic heating cable
Structure of floor heating cable
Strong points of floor heating cable
- Economic feasibility
-
- Greatly reduces construction cost using simple construction technique
- Central and partial heating are possible, providing heating that meets customers’ needs.
- Safety
-
- Sheath is processed using silicone with 200℃ of insulation temperature, and electromagnetic wave is screened once more in order to perfectly block electromagnetic wave.
- Has no oil or smoke emission.
- Functionality
-
- Reduces building load due to thin thickness
- Can be used in various ways by adjusting the amount of radiation
(Sauna/Stockbreeding/Vinyl greenhouse, etc.) - Utilizes special radiation conductor that considers resistance value per unit length for high heating efficiency.
- Simplicity
-
- Does not require an additional management facility or costs after initial installation
- Does not require a boiler room, having advantage in space utilization
Specifications of floor heating cable
| Classification | Model No. | Electricity consumption (W/h) |
Length (m) |
Applied area (㎡ , Korea) |
Notes |
|---|---|---|---|---|---|
| Dual core | DW25W11L | 275 | 11.0 | 1.65㎡ | Ø7.5mm 25W/m Grounded Braided |
| DW25W22L | 550 | 22.0 | 3.30㎡ | ||
| DW25W33L | 825 | 33.0 | 4.95㎡ | ||
| DW25W44L | 1,100 | 44.0 | 6.60㎡ | ||
| DW25W55L | 1,375 | 55.0 | 8.25㎡ | ||
| DW25W66L | 1,650 | 66.0 | 9.90㎡ | ||
| DW25W77L | 1,925 | 77.0 | 11.55㎡ | ||
| DW25W88L | 2,200 | 88.0 | 13.20㎡ | ||
| DW25W110L | 2,750 | 110.0 | 16.50㎡ | ||
| Single core | DW20W14C | 280 | 14.0 | 1.65㎡ | Ø5.5mm 20W/m Grounded Braided |
| DW20W21C | 420 | 21.0 | 2.60㎡ | ||
| DW20W29C | 580 | 29.0 | 3.60㎡ | ||
| DW20W35C | 700 | 35.0 | 4.30㎡ | ||
| DW20W49C | 980 | 49.0 | 6.00㎡ | ||
| DW20W56C | 1120 | 56.0 | 6.90㎡ | ||
| DW20W70C | 1400 | 70.0 | 8.60㎡ | ||
| DW20W105C | 2100 | 105.0 | 13.20㎡ | ||
| DW20W140C | 2800 | 140.0 | 16.50㎡ | ||
| V type | DW25W24V | 480 | 24 | 20W/m | |
| DW25W48V | 960 | 48 | |||
| DW25W72V | 1440 | 72 | |||
| DW25W96V | 1920 | 96 | |||
| DW25W120V | 2400 | 120 |
※ Construction gap is 7~15cm according to use and conditions of the site.
Heating temperature Calorific value of a heating cable
※ This data was measured indoor (16°C) using the measurement equipment of ENERPIA Technology Research Center, and there may be differences on actual sites. ENERPIA
Download specification
Download specification
Video on construction
Construction procedure
- 01
Design blueprint
- 02
Install insulating materials
- 03
Install wire mesh
- 04
Wiring heating cable
- 05
Performance test
- 06
Cement mortar
- 07
Install finishing materials
- 08
Install thermostat
Construction cross-section
Recommended thermostat
| UTH-170(EPU-400) | |
|---|---|
| TYPE | Digital Type |
| Range of temperature | -20℃ ~ 80℃ (can be changed) |
| Power input | AC 85V AC 265V (SMPS) |
| Number of circuits | Individual |
| Allowable electric current | 1 heating * 18A |
| Load capacity | 4KW |
| Construction type | Exposed |
| Size | 70(W) X 120(H) X 27(D) |
| Display Type | High-brightness YELLOW FND (indicates current temperature, set temperature), LED (indicates status) |
| Processor Type | Sensor type (NTC 5KΩ) / Timer setting / Auto OFF function by time |
| Option |
|
| UTH-200 | |
|---|---|
| TYPE | Digital Type |
| Range of temperature | 0℃ ~ 80℃ (can be changed) |
| Power input | AC 85V ~ AC 265V (SMPS method) |
| Number of circuits | Individual |
| Allowable electric current | 1 heating * 18A |
| Load capacity | 4KW |
| Construction type | Exposed |
| Size | 70(W) X 120(H) X 27(D) |
| Display Type | High-brightness YELLOW FND (indicates current temperature, set temperature), LED (indicates status) |
| Processor Type | Sensor type(NTC 5KΩ) / Timer setting / Strength setting / Control by wireless remote control (remote control) |
| Option | #1: Overload sensor (optional) #2: Error message function (can change setting on range of temperature), output blocking #3: Overload sensor (produces error message for blocking output when overload occurs) |
| UTH-300 | |
|---|---|
| TYPE | Digital Type |
| Range of temperature | -20℃ ~ 180℃ (can be changed) |
| Power input | AC 85V ~ AC 265V (SMPS method) |
| Number of circuits | 2-circuits, individual |
| Allowable electric current | 1 heating (16A), 2 heating (16A) – (MAX 32A) |
| Load capacity | 3.5KW * 2 |
| Construction type | Exposed |
| Size | 120(W) X 120(H) X 34(D) |
| Display Type | High-brightness YELLOW FND (indicates current temperature, set temperature), touch mode |
| Processor Type | Sensor type (NTC 5KΩ) / Timer setting |
| Option | #1: Produces buzzer alarm when error occurs #2: Overload sensor (optional) #3: Error message function (can change setting on range of temperature), output blocking #4: Sensor for preventing overload attached inside thermostat (blocks overheating) |
Certification information
-
- 실용신안(제 20-0412561호)
-
- ISO 9001
-
- ISO 14001
-
- 러시아 GOST(히팅케이블)
-
- CE(히팅케이블)
4 major conditions for floor heating cable
-
- Primary sheathing of heat line
- Sheath that can withstand the heat-resistance temperature of the heat line (prevents short circuit of the heat line)
-
- Durability of a cold lead
- It is the junction of the hot wire and the wire, the so called Achilles tendon of the heating cable. It should be a product with excellent durability, moisture proof and insulation effect.
-
- Specification of heat line
- Heat line must not exceed 20W/m (Enerpia dual core -12.5W/m x2C, single core -20W/m x1C
-
- Zero electromagnetic wave
- Absorbs magnetic field using grounding facility as well as electric field by installing screening net inside liquid tube in order to eliminate electromagnetic wave to zero (the first in Korea)
Product comparison
PE product photo
Enerpia product photo
- DIY mat cable (dual core)
- Heating cable specialized so that customers can purchase DIY mat cable and install it with convenience and ease
Can be easily constructed in places with much moisture, for finishing materials of tiling, and in a porch
-
- ISO 9001
-
- ISO 14001
-
- 러시아 GOST(필름,매트케이블)
-
- CE(매트케이블)
Strong points of DIY mat cable (dual core)
- Simplicity
- The simple construction method is possible for consumers to directly install it without a professional workforce.
- Economic feasibility
- Does not require a boiler room, having advantage in space utilization
Does not require separate maintenance or management cost
Has no oil or smoke emission
- Constructability
- Reduces building load due to thin thickness
Can be installed by consumers on their own, greatly reducing the construction cost
- Safety
- Does not produce any electromagnetic wave, anyone to use it with safety
Specifications of DIY mat cable (dual core)
| Model name | Applied area (W x L) | Heating area (m²) | Electricity consumption / length (m) |
|---|---|---|---|
| EP20W1.0m² | 0.5 x 2m | 1.0m² | 140W/h / 7m |
| DW20W1.5m² | 0.5 x 3m | 1.5m² | 210W/h / 10.5m |
| DW20W2.0m² | 0.5 x 4m | 2.0m² | 280W/h / 14m |
| DW20W3.0m² | 0.5 x 6m | 3.0m² | 420W/h / 21m |
| DW20W4.0m² | 0.5 x 8m | 4.0m² | 560W/h / 28m |
| DW20W5.0m² | 0.5 x 10m | 5.0m² | 700W/h / 35m |
| DW20W6.0m² | 0.5 x 12m | 6.0m² | 840W/h / 42m |
| DW20W8.0m² | 0.5 x 16m | 8.0m² | 1120W/h / 56m |
| DW20W10.0m² | 0.5 x 20m | 10.0m² | 1400W/h / 70m |
| DW20W12.0m² | 0.5 x 24m | 12.0m² | 1680W/h / 84m |
※ Thermostat sold separately. Customized production possible according to use
Download specification
Video on construction
Construction order
- 01
Install DIY Mat Cable
- 02
Mat Cutting & Change of Direction
- 03
Performance Test
- 04
Cement Mortar
- 05
Install finishing materials
- 06
Install thermostat
Construction cross-section
Recommended thermostat
| UTH-170(EPU-400) | |
|---|---|
| TYPE | Digital Type |
| Range of temperature | -20℃ ~ 80℃ (can be changed) |
| Power input | AC 85V AC 265V (SMPS) |
| Number of circuits | Individual |
| Allowable electric current | 1 heating * 18A |
| Load capacity | 4KW |
| Construction type | Exposed |
| Size | 70(W) X 120(H) X 27(D) |
| Display Type | High-brightness YELLOW FND (indicates current temperature, set temperature), LED (indicates status) |
| Processor Type | Sensor type (NTC 5KΩ) / Timer setting / Auto OFF function by time |
| Option |
|
| UTH-200 | |
|---|---|
| TYPE | Digital Type |
| Range of temperature | 0℃ ~ 80℃ (can be changed) |
| Power input | AC 85V ~ AC 265V (SMPS method) |
| Number of circuits | Individual |
| Allowable electric current | 1 heating * 18A |
| Load capacity | 4KW |
| Construction type | Exposed |
| Size | 70(W) X 120(H) X 27(D) |
| Display Type | High-brightness YELLOW FND (indicates current temperature, set temperature), LED (indicates status) |
| Processor Type | Sensor type(NTC 5KΩ) / Timer setting / Strength setting / Control by wireless remote control (remote control) |
| Option | #1: Overload sensor (optional) #2: Error message function (can change setting on range of temperature), output blocking #3: Overload sensor (produces error message for blocking output when overload occurs) |
| UTH-300 | |
|---|---|
| TYPE | Digital Type |
| Range of temperature | -20℃ ~ 180℃ (can be changed) |
| Power input | AC 85V ~ AC 265V (SMPS method) |
| Number of circuits | 2-circuits, individual |
| Allowable electric current | 1 heating (16A), 2 heating (16A) – (MAX 32A) |
| Load capacity | 3.5KW * 2 |
| Construction type | Exposed |
| Size | 120(W) X 120(H) X 34(D) |
| Display Type | High-brightness YELLOW FND (indicates current temperature, set temperature), touch mode |
| Processor Type | Sensor type (NTC 5KΩ) / Timer setting |
| Option | #1: Produces buzzer alarm when error occurs #2: Overload sensor (optional) #3: Error message function (can change setting on range of temperature), output blocking #4: Sensor for preventing overload attached inside thermostat (blocks overheating) |