ENERPIA

The cutting-edge technology of ENERPIA leads to a richer life.

Demister System

Demister System: A system that prevents misting or fogging by attaching a mirror heating film on the back of a mirror. It can be applied in places where fogging occurs such as bathrooms.

What is a mirror heating film?: It is a special heating film based on heat producing film that prevents misting or fogging on mirrors by being attached on the back of mirrors and producing heat.

히팅필름을 기본으로 한 특수 발열 필름으로 거울 후면부에 부착되어 발열함으로써 거울에 습기가 차는 것을 방지해주는 제품입니다.

Components of mirror heating film

Uses flame-resistant PET: The PET FILM used for the product uses the model that UL heat resistance certified, a white product with the VTH-2 insulation chip built in, making it very safe.

Applies gravure printing process: The screening process, which is used in most domestic and foreign production, is not appropriate for sheet type heating element carbon printing as carbon cannot be applied evenly. Local heating also occurs, which may cause fires and short circuits. To lower these risks, our company chose the gravure printing process, and we have achieved even resistance in the sheet type heating element, which directly controls the electrical resistance, securing safety for our products.

Wide silver space: Silver plays a role of a cross-link (spark prevention, cold lead for heat wires), which stably converts electrical energy into heat energy between the copper bus bars and carbon. It is directly related to the lifespan and safety of the product. Our company has expanded the use of silver space, adding safety to the product.

Uses copper bus bars that are 15mm wide, and 15 amperes.: Wide copper bus bars prevent overheating during operation, and the thinner they are, it increases the adhesiveness of the PET, preventing air pockets and stabilizing the product. (Competitors: 8-10 mm)

Nanoparticle carbon paste: We use carbon paste that is composed of nanoparticles (smaller than 1 micron) that are specially produced on flame resistant PET FILM, increasing the heat efficiency, safety, and lifespan of the product.

Functional

Economical

The product can be used with a small amount of electric energy. (Specific figure)
Maintenance cost can be saved by activating the product only when needed.

Safety

Using gravure printing process, we have achieved even resistance in the sheet type heating element.
Since carbon paste composed of nanoparticles (smaller than 1 micron) that are specially produced on flame resistant PET FILM is used, safety has been enhanced.

Eco-friendly

We do not use materials that are harmful to the human body such as electronic magnetic substances.
Far-infrared ray and anion which are good for the human body are emitted (far-infrared ray 90.3%, anion 256/cc).

MODEL	Width (mm)	Length (mm)	Power usage (W)
MHF 2750	270	500	26
MHF 2710	270	1000	51
MHF 4030	400	300	23
MHF 4050	400	500	38
MHF 4010	400	1000	76
MHF 5050	500	500	48
MHF 5075	500	750	71
MHF 5010	500	1000	95
MHF 8010	800	1000	152
MHF 1010	1000	1000	190

* Under 220V voltage conditions
* Product standards and power usage can be made-to-order