Snow melting cable installation for at Pyeongtaek Dangjin Port
Construction site : "Kia Motors" Highway Construction at Pyeongtaek Dangjin Port
Date of construction : 2017.08.04~08.05
[ Construction work of Snow Melting Cable]
As a first step for snow melting construction process we are carving out the existing road.This construction method is a method of laying a snow melting cable through the laying method and wrapping the asphalt on it.
The road has been thoroughly cleaned up
Now it is time to install the Enerpia's snow melting cable. Lets see the entire process.
As the next step we carefully wrapped the snow-melting cable to the roller.
A snow melting cable is also going to be mounted on the other side of the road.
Now when all area supposed to installation is covered with snow melting cable the next step is fixing and fastening the cable.
From now on, we need to secure the cable to the ground. We use a cable clip band to hold the cable so that it can be fixed to the floor. Snow melting cable is fixed at regular intervals.
Snow melting cable should be fixed tightly. So cable won't break later when covering the ground surface.
After flattening the asphalt there is a last step for snow melting construction. It is the snow melting system control panel that should be installed as a final stage.
Now snow melting cable is ready for operation and utilization